TheSaffaGeek

My ramblings about all things technical

VMware vSphere: Manage for Performance Course Experience

3 Comments

Last week I was fortunate enough to be able to attend the VMware vSphere: Manage For Performance course. I did the lab related to this course at VMworld Europe last year and in my now increasing preparations for the VCAP-DCA exam I knew I needed to strengthen my troubleshooting skills and more importantly fine tuning my ESXTOP/RESXTOP skills. Quite a few people commented that they really liked my VMware vSphere: Manage and Design for Security Course Experience posting so I thought i would try do the same for this one for anyone interested or thinking about booking the course.

  1. Day one covered the first three and a half modules Course Introduction, Performance in a Virtualized Environment, Virtual Machine Monitor and part of CPU Performance. It introduced you to all the monitoring tools you can use with an introduction to the performance graphs in Virtual Centre and ESXTOP,how to utilise these tools to work out possible problems and what to look for that may be good indicators of problems. Probably the thing I enjoyed the most about this course was that there was loads of labs for you to learn how to do it all yourself rather than learning it off a PowerPoint sheet or your course guide. If you are a regular reader of this blog then you’ll know I’ve been trying to perfect my knowledge of ESXTOP/RESXTOP and wrote a blog about it too “Understanding and using ESXTOP/RESXTOP”. This learning of it was a great stepping stone for the skills they covered in the course and for a few parts the links and resources in my blog gave me an even deeper knowledge of ESXTOP. For the virtual machine monitor module it covered Software and hardware virtualisation techniques which i knew fairly well from my studying for my VCP exams and the labs for it were really great in covering how the usage of these varying techniques can really help with the performance of your virtual machines/environment. Next we got into a bit of the CPU Performance module which introduced the CPU scheduler, CPU Cache contention and the NUMA. As with the hardware/software virtualisation techniques i had a good bit of knowledge about the CPU scheduler and NUMA from my VCP studies but it was a great refresher on the NUMA particularly and allowed me to better understand how it works and how the misallocation of resources can impact your virtual machines due to NUMA. Frank Denneman has done two brilliant postings all about the sizing of VM’s and NUMA Nodes and ESX 4.1 NUMA Scheduling which covers pretty much everything you need to know about this feature and how to use it correctly in your environment.
  2. Day 2 we finished off CPU Performance by learning how to use ESXTOP and the performance metrics in vCentre to find and recognise possible cpu problems and how to fix them. Next we covered Memory Performance which was fairly straight forward in my opinion but did give great recommendations on how to utilise your memory effectively and how ballooning and memory swapping works and what the increase of these values means to the performance of your environment. Yet again Frank Denneman has covered these topics brilliantly in two blog postings Memory reclamation, when and how? and Disable ballooning? which I’ll personally be rereading through myself so as to better my understanding of how it can help/impact my virtual machines. Next we did the Network Performance module which covered all the varying network card options you can select,what each allows you to do,what additional features each one gives and how these features work. This was also a refresher for me due to my VCP studies but it did seem to alert a lot of the people on the course with me to the benefits of upgrading all your virtual machines to hardware version 7 and changing their network cards to VMXNET3. VMware have a great KB article on this Choosing a network adapter for your virtual machine. For the rest of the module it was yet again teaching you how to find and troubleshoot possible network problems using the performance charts and ESXTOP.
  3. Day 3 finished off the last three modules Storage Performance,Virtual Machine Performance and Application Performance. Storage performance was good and was very interesting to hear how many people don’t use thin provisioning due to their belief that it impacts performance in certain ways. I’m not going to get into it on here and I agree it does in certain instances but like I said to the people on the course with me I would recommend reading  the VMware white paper on it first and make your own decisions from there. There are also loads of top blog postings on the subject so I would also recommend reading a few of those (Duncan Epping’s and Eric Gray’s in particular). For the last two modules of Virtual Machine Performance and Application performance these were essentially just applying what you learn for cpu,memory and network to your virtual machines and what to consider for the virtualising of differing applications.

Funnily enough whilst on the course the latest release of the vSphere performance troubleshooting guide for 4.1 came out which is perfect post course reading material for me. Duncan Epping’s posting alerted me to the release so only right to point to his posting here.

Well that’s a high level review of what I learnt/was covered in the course. As with any course though what you get out of the course is very dependant on your knowledge of the product/s and even though I have a fairly good amount of knowledge on the product and features I did still learn a fair amount and it was a really great refresher on certain features in preparation for my VCAP: DCA exam sitting.

Gregg

Advertisements

3 thoughts on “VMware vSphere: Manage for Performance Course Experience

  1. Thanks for the write up Gregg. As another VCAP candidate I find these very useful – my employer won’t be paying for me to attend any courses so I need to know what the course involves (so I can get the right amount of self study in) and what people think of it. Which course did you think the more useful for VCAP-DCA – Security or Performance?

    • Glad it helps =0) Personally I found I got more out of the performance course than the security, as the security was essentially just us going through the hardening guide. Whereas the perfornmance you got to play around a lot more and I learn a lot better when I do things myself. To be honest the links I’ve pointed to in the posting should be adeqaute if you aren’t able to attend the course and then all you need to do is play around with all the stuff yourself in your home lab.

  2. Pingback: All Things Virtual 21 « TheSaffaGeek

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s